FAQs / Product Knowledge Base

Welcome to our FAQs knowledge base. To find what you're after, use the search box below or choose a category to view listed FAQs.
Search the FAQs Knowledgebase Browse by Category

View FAQs by Category

Category Icon Application (6)
Category Icon Cleaning (2)
Category Icon Products (30)
Category Icon The finished result (10)

Most Popular FAQs rss button

  1. Why is the first coat taking too long to dry?
  2. How should I maintain my Floor?
  3. The finish has dried with bubbles on the surface and looks like orange peel in places. What causes this?
  4. Why has the paint near my new coating yellowed?
  5. Is it OK to recoat MODIFIED OIL or TUNGSEAL with MONOTHANE (Moisture cure Polyurethane)?
  6. Can I use Monothane (Polyurethane) to coat Interior Concrete?
  7. Why does poor adhesion and delamination occur with some coatings on hardwoods?
  8. How long will it take for the smell of drying coatings to disappear?
  9. Should Swirl marks be visible in the beam of down lights?
  10. Why has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled?

Recent Entries rss button

  1. Popular QuestionWhy is the first coat taking too long to dry?
  2. Popular QuestionShould Swirl marks be visible in the beam of down lights?
  3. Popular QuestionHow long will it take for the smell of drying coatings to disappear?
  4. Popular QuestionWhy has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled?
  5. Popular QuestionWhat type of Brush or Roller should be used to apply the finish?
  6. Popular QuestionWhy does poor adhesion and delamination occur with some coatings on hardwoods?
  7. Popular QuestionCan I use Monothane (Polyurethane) to coat Interior Concrete?
  8. Popular QuestionHow should I maintain my Floor?
  9. Popular QuestionThe finish has dried with bubbles on the surface and looks like orange peel in places. What causes this?
  10. Popular QuestionWhy has the paint near my new coating yellowed?

Most Popular Searches

  1. water based polyurethane
  2. Floor gap fillers
  3. vapours after curing time
  4. recoat
  5. mixing different brands
  6. tungseal application
  7. winter
  8. A&B polyurethane soulven base
  9. Nature of Timber
  10. mixind different brands