FAQs / Product Knowledge Base

Search the FAQs Knowledgebase Browse by Category

View FAQs by Category

Sealers rss button
There were 5 FAQs found in this category:
  1. questionWhy is the first coat taking too long to dry?
    Typical drying conditions assume a temperature of 25°C, and 50% relative humidity. Drying times of Urethane Coatings Products; MONOTHANE 45 GLOSS (Moisture cure Polyurethane) - Touch Dry 3 Hours TIMBERSEAL (Vinyl Base) - Touch Dry 1 Hour TUNGSEAL - Touch Dry 1.5 Hours MODIFIED OIL GLOSS, MO ...

  2. questionWhy has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled?
    The problem is predominately associated with Oil based coatings TUNGSEAL, MODIFIED OIL GLOSS and MODIFIED OIL SATIN and is caused by the premature application of the second coat - that is application of the second coat before the first coat is fully cured. The effect is similar to that caused ...

  3. questionWhy does poor adhesion and delamination occur with some coatings on hardwoods?
    From time to time the topic of adhesion and delamination arises as an interesting point of discussion. Several factors influence and contribute to poor adhesion and/or delamination of many coatings, including TIMBERSEAL and TUNGSEAL. As detailed on the TIMBERSEAL label and documented in Urethane ...

  4. questionCan I use Monothane (Polyurethane) to coat Interior Concrete?
    Yes, the key to success in coating interior concrete floors is the preparation. Unfortunately, some old floors that are heavily contaminated with oily substances are probably not worth the trouble of coating with any coating because it is virtually impossible to completely remove some contaminan ...

  5. questionIs it OK to recoat MODIFIED OIL or TUNGSEAL with MONOTHANE (Moisture cure Polyurethane)?
    The major products manufactured by Urethane Coatings are detailed in the table attached (click here to download) with the FIRST COAT detailed in Column One. The SECOND COAT is shown across the top Row. If for example you want to know if you can apply TUNGSEAL over MONOTHANE 45 GLOSS, look down t ...