FAQs / Product Knowledge Base

Search the FAQs Knowledgebase Browse by Category

Advanced Search


-->
* Query:
  Categories:
  Rated:
  Custom Fields:

Search Results for "vapours after curing time"

There were 6 FAQs found for your query:
  1. Why does poor adhesion and delamination occur with some coatings on hardwoods? Why does poor adhesion and delamination occur with some coatings on hardwoods?
    From time to time the topic of adhesion and delamination arises as an interesting point of discussio...), preventing penetration of the first coat. Slow curing coatings Artificial contamination Thinning ...

  2. Why has the paint near my new coating yellowed? Why has the paint near my new coating yellowed?
    ... is coated with Polyurethane soon after the surrounding walls have ...walls turn pale yellow during the curing process of the Polyurethan...cted if they are given sufficient time to dry. Generally, paint ma...

  3. Why has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled? Why has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled?
    ...en the first coat and the substrate. In some circumstances the first coat takes an abnormally long time to cure - please refer to the question, Why is the first coat taking too long to dry? Usually ...

  4. Why is the first coat taking too long to dry? Why is the first coat taking too long to dry?
    ...e of 25°C, and 50% relative humidity. Drying times of Urethane Coatings Products; MONOTHANE 4...ture to change than the air. Therefore in winter after a cold night, the air temperature will incre...

  5. Can I use Monothane (Polyurethane) to coat Interior Concrete?Can I use Monothane (Polyurethane) to coat Interior Concrete?
    ...ecause it is virtually impossible to completely remove some contaminants. New Concrete Ideally, a curing period of one month per inch of concrete should be allowed before attempting to coat a new co...

  6. The finish has dried with bubbles on the surface and looks like orange peel in places. What causes this?The finish has dried with bubbles on the surface and looks like orange peel in places. What causes this?
    ...quick drying finish thickens rapidly reducing the time required for the bubbles, brush or roller mar...th. An orange peel effect is created by a roller after a finish has become too thick to completely ...