FAQs / Product Knowledge Base

Search the FAQs Knowledgebase Browse by Category

Advanced Search


-->
* Query:
  Categories:
  Rated:
  Custom Fields:

Search Results for "water based polyurethane"

There were 8 FAQs found for your query:
  1. How should I maintain my Floor?How should I maintain my Floor?
    While polyurethanes are widely recognised as the most durable surfa...hite Vinegar into a bucket of hot water, and mop the floor, regular...ary. Suitable polishes are those based on a metal-link acrylic pol...

  2. Why does poor adhesion and delamination occur with some coatings on hardwoods? Why does poor adhesion and delamination occur with some coatings on hardwoods?
    ... and thereby ensure that the subsequent coat/s of polyurethane or oil based finish remain laminated ...

  3. Why has the paint near my new coating yellowed? Why has the paint near my new coating yellowed?
    ...ry. Allow in the quotation provision for washing the walls with chlorine solution. Coat with an oil based coating; eg. MODIFIED OIL GLOSS, MODIFIED OIL SATIN or TUNGSEAL.

  4. Why has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled? Why has the second coat of TUNGSEAL or MODIFIED OIL blistered, fried or wrinkled?
    The problem is predominately associated with Oil based coatings TUNGSEAL, MODIFIED OIL GLOSS and MODIFIED OIL SATIN and is caused by the premature application of the second coat - that is applicatio...

  5. Is it OK to recoat MODIFIED OIL or TUNGSEAL with MONOTHANE (Moisture cure Polyurethane)? Is it OK to recoat MODIFIED OIL or TUNGSEAL with MONOTHANE (Moisture cure Polyurethane)?
    The major products manufactured by Urethane Coatings are detailed in the table attached (click here to download) with the FIRST COAT detailed in Column One. The SECOND COAT is shown across the top Ro...

  6. Why is the first coat taking too long to dry? Why is the first coat taking too long to dry?
    Typical drying conditions assume a temperature of 25°C, and 50% relative humidity. Drying times of Urethane Coatings Products; MONOTHANE 45 GLOSS (Moisture cure Polyurethane) - Touch Dry 3 Hour...

  7. Can I use Monothane (Polyurethane) to coat Interior Concrete?Can I use Monothane (Polyurethane) to coat Interior Concrete?
    Yes, the key to success in coating interior concrete floors is the preparation. Unfortunately, some old floors that are heavily contaminated with oily substances are probably not worth the trouble of...

  8. Should Swirl marks be visible in the beam of down lights? Should Swirl marks be visible in the beam of down lights?
    ...t paper, then finish with ‘Blue Magic pad’ or Maroon pad Use the high build/high solids polyurethane, MONOPTHANE HS 50 GLOSS Use low sheen polyurethane such as MONOTHANE SEMI GLOSS or MONO...