|A material which does not take part in the chemical reaction but is included to alter the final product eg. Fillers, pigments, flame retardants etc.
|An additive to a foam mixture with the purpose of producing a “blown” foam through the production of a gas. The selected blowing agent also influences the insulation quality of the foam.
|A combination of two or more materials. Eg. The polyol in a foam system.
|A portion of foam cut from a larger, usually continuous slabstock.
|The filling of essentially open moulds with liquid polyurethane.
|An ingredient in polyurethane systems which initiates a chemical reaction or increases the rate of chemical reaction.
|The individual cavities of a foam formed by the nucleation and growth of bubbles within the reacting mixture.
|Open Cells – Cells in a foam with no barrier in between. This allows gases and liquid to flow through the foam. Close Cells – Cells enclosed by a continuous membrane so there are no passageways for airflow.
|Lengthening of the main chain or backbone of polymer molecules by end to end attachment.
|A separately metered stream of liquid which will be directly introduced into the mixing head.
|The internal portion of a moulded foam which is free from a skin. This portion is usually used for checking the density of the foam.
|A measure of the beginning of the foam reaction. Usually characterized by a change in the liquids color as it begins to rise.
|The formation of chemical links between the molecular chains.
|Usually a mechanical procedure to open the closed cells of a high resilience foam after demoulding.
|A term which refers to the completeness of the chemical reaction.
|A component that results in chemical activity between the components, with an increase in the rate of cure.
|A term most commonly used in situations where many items are being manufactured on an automatic or semi-automatic production line. It includes the time required for mould preparation, including release agent application, dispensing of components, reaction, cure and demould.
|A foam which only slowly regains its original shape after deformation.
|The time between dispensing the liquid components into the mould and removing the article being produced.
|The weight per unit volume of the foam normally expressed in kg/m3. Core Density – Density at or near the centre of the foam Overall Density – Density of the foam including any moulded skin. Free Rise Density – Usually measured in kg/m3. It can be free rise or packed into a mould.
|The temperature at which a vapour begins to condense.
|The increase in length of a specimen at the instant before rupture occurs. Expressed as a present of original length.
|The heat released by the foam reaction. The heat can accelerate the foaming process.
|An unreactive material added to the polyurethane mixture. They usually solid materials such as glass and silica.
|A substance which is added to a polymer formulation to reduce or retard its tendency to burn.
|Refers to the crumbling or powdering of a foam when the surface is rubbed.
|The time when the foam has developed enough gel strength to be dimensionally stable.
|The surface property relating to the resistance of indentation.
|The breakdown of polymers in the presence of water.
|The combined oxygen and hydrogen radical (-OH) which forms the reactive group in polyols.
|Ability to withstand mechanical or physical blows without the loss of protective properties.
|A technique of mixing through high velocity contact of the two streams.
|The family name of chemical compounds having one o more NCO groups attached to the main chain.
|The heat transfer coefficient commonly used to compare the insulation values of different materials. The lower the K value, the better the insulator.
|An abbreviation for diphenylMethane Di Isocyanate.
|An elastomer of cellular structure having a density between 1.3 and 1.2.
|Time in seconds a foam mixture has to be mixed before pouring into a mould.
|One thousandth of an inch, 0.001 inch. A unit used to measure coating thickness.
|The density of a foam when expanded and cured in its final shape.
|The process of producing a finished article from a closed mould.
|Napthalene Di Isocyanate.
|Nitrogen, Carbon, Oxygen. The chemical formula for an isocyanate group.
|The dispensed foam mixture is placed in an open mould, allowing it to free-rise.
|Purposely adding more material to the mould than is required to just fill it. This technique is used for increasing the density of the finished moulded part.
|A modified type of polyurethane foam which exhibits improved resistance to high temperatures.
|Polymeric compound, with the reactive hydroxyl groups containing ester linkages.
|Polymeric compounds with reactive hydroxyl groups containing ether linkages.
|A high molecular weight compound, natural or synthetic, whose chemical structure can be represented by a repeated small unit.
|A chemical compound with more than one reactive hydroxyl group attached to the molecule.
|The period of cure after the product has been removed from the mould. In some cases, accelerated curing at elevated temperatures is used.
|The length of time after mixing together of the two components during which the polymer remains sufficiently liquid to be processed.
|A chemical intermediate manufactured by reacting all the isocyanate with part or all of the polyol.
|Poly Tetra Methylene Ether Glycol
|Abbreviation of Polyurethane.
|Applied to a mould to allow the foam to be demoulded easily.
|Reaction Injection Moulding. A process of injecting a reacting mixture of polyurethane into a mould.
|The time when the freely rising foam stops growing.
|A foam mixture which forms a skinned surface on moulding.
|The outer surface of a foam which occurs from the surface cooling more rapidly than the core. It is normally higher in density than the core.
|A polyurethane foam which is made into a continuous block.
|A rather ambiguous term used to describe almost any combination of mechanical parts or chemicals which have some relationship to each other. Often used to describe the supply of all chemical components needed to produce a polyurethane.
|TACK FREE TIME
|The time between the beginning of the foam pour and the point at which the outer skin of the foam loses its stickiness.
|An abbreviation for Toluene Di Isocyanate.
|The rate of heat transfer through a thickness of foam with a known area. The lower the value, the better the insulator. (see “k value”)
|A material which can be melted and solidified an indefinite number of times without permanent chemical change.
|A material which does not change on heating until it reaches the decomposition point.
|Having the property of decreasing viscosity with increasing shear stress. A coating is thixotropic if it thins with stirring or pumping but thickens back up when movement decreases.
|The controlled release of gases (such as air) from a mould through holes, slots etc.
|A measure of the thickness of a liquid. The lower the number the thinner the liquid.
|VOLATILE ORGANIC COMPONENTS (VOC)
|Organic materials which evaporate at normal temperatures and pressures, organic materials which have vapor pressure greater than 0.1 mmHg at one atmosphere.